RGB or LED Values for Custom Uplighting Rental Colors

In addition to the 7 pre-set colors you can also enter in a specific RGB value to create your own custom color for your lighting design. Its important to mention that these are 2-digit RGB codes which correspond to a percentage value. Also, lighting can look very different from one room to the next so to get a very specific color, you'll have to do some experimentation on your own. To get started, here are some RGB codes our past clients have figured out:

r94 g18 b0 -> Amber


r94 g11 b0 -> Amber


r85 g5 b5 -> Hot Pink


r37 g0 b75 -> Purple


r88 g5 b0 -> Orange


r0 b31 g00 -> Light Green/Light Blue-ish

Here are directions for setting a custom color:

1. Plug light in. Wait 1-2 seconds for it to light up.


2. Press the Menu button a few times until you see "U" then press "enter"


3. Select a "r" (red) value by using the "up" and "down" keys to scroll through the values. Press "enter" to set the value.


4. Select a "g" (green) value by using the "up" and "down" keys to scroll through the values. Press "enter" to set the value.


4. Select a "b" (blue) value by using the "up" and "down" keys to scroll through the values. Press "enter" to set the value.


5. Press "enter" once more to set your custom color.